Basalt Crushing Production Line Site

Basalt Crushing Production Line Site

Production of 800 tons of basalt crushing production line

production material

The main components of basalt are silica, alumina, iron oxide, calcium oxide, magnesium oxide (and a small amount of potassium oxide, sodium oxide), of which silica is the most abundant, accounting for about 45 to 5 percent. About ten, it has high hardness, strong pressure resistance, asphalt adhesion and other characteristics, and is internationally recognized. It is a relatively good stone for the development of high-speed rail transportation and high-grade road transportation.

Equipment selection and configuration

Compared with ordinary building stone, the basalt rock material has higher grain shape requirements and stricter particle size control. In view of the very high loss of wear-resistant parts of basalt rock materials, we must select the equipment with high wear resistance and wear resistance. Our technical manager has tailored a reasonable basalt crushing process for Mr. Dai. Firstly, some traditional crushing equipments with the principle of grinding and beating were selected to use the concept of “breaking more and less grinding” and the crushing equipment of the lamination principle to reduce the wear of the wear parts. For this reason, our technical manager chose the compressive strength. Large, wear-resistant head breaking equipment jaw crusher and two-breaking equipment single-cylinder cone crusher.


In this configuration, the secondary crushing is adopted, and the technical parameters matching between the crushing stages are fully considered, so that not only the quality of the broken granular shape can be ensured to a large extent, but also various crushing equipments are well handled. Better crushing ratio requirements. Several finished products fully meet the requirements of highways, high-speed railways, engineering buildings and other projects. At the same time, it can also be equipped with dust removal and noise reduction devices according to local environmental protection requirements.

Basalt production site reveals

The basalt block stone is first broken into the jaw crusher through the vibrating feeder, and the material is transported to a small silo built near the cone crusher, and then passed through the vibration to understand the entry into the cone crushing chamber. After secondary crushing, the crushed materials can be sieved into different specifications by vibrating screens and transported to different finished products. Of course, there are exceptions. Unqualified products need to be transported back to the cone crusher through the conveyor until they reach the finished product. Particle size requirements.

Related Articles

  1. Construction Waste Machines
  2. Which Sand Making Machine Produces Good Sand
  3. How Much is a Mobile Coal Crusher

Related Machine

Inquiry Chat Now